Graphic and Video Cards


We check start of port of the modem: Do not forget to change them for the devices! We are overloaded and try! For completion of connection we return to the telnet window and we press Ctrl-C. We put the IP address of the network interface card of the computer in We start, we specify the router address in settings

Uploader: Samukora
Date Added: 4 November 2006
File Size: 8.95 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 64216
Price: Free* [*Free Regsitration Required]

Geek magazine hacker daily blog Home Categories Companies. We put the IP address of the network interface card of the computer in After initial inclusion of a router he registered in my home local area network with the address We leave on Ctrl-C.

We distribute the 3G-Internet on all apartment (to Anydata ADU-300A and D-Link DIR-320)

Now we add ppp-connection dialing scripts: This article is a translation of the original post at geektimes. The Vendor and Product codes in article are specified for my modem!

We power off a router. We come into a router under the telnet protocol address On the screen something has to appear similar: And as computers a little — it is desirable to distribute this Wellcom for all, independently from each other.

Last Drivers  KX-P1150 WINDOWS XP DRIVER

Customer Support | TRENDnet

We connect a router the enclosed lace to the network interface card of the computer. We put IP of the network interface card of the computer on automatic receipt of the address. We are overloaded and try! We rename it into firmware. We release reset and at anyrata same time we press on the Upgrade button in the tftp2 program.

In open telnet session we give command: Pay attention — in our script dialup specified the nodetach parameter therefore we will remain in open session before clicking of Ctrl-C. Do not forget to change them for the devices!

If you have any complaints about this article or you want this article to be deleted, please, drop an email here: I put everything in c: For work with telnet under Windows I recommend to use putty.

We check start of port of the modem: Files of dialing at us are already saved, it is necessary to start port of the modem only once again, manually. The way should not have spaces and other than the English characters.

Theoretically, this question was already repeatedly discussed on open spaces of an immense network, I decided to reduce everything in one “the instruction for lazy”. Addu-300a a start we need to define vendor and product code for our modem. Important — all the rest if suddenly it is, from a router it afu-300a disconnected! We wait about 5 minutes so far the firmware “will be unrolled”, the status indicator will light up after that.


Thus, it will be possible to see what occurs in the course of dialing: We believe that the knowledge, which is available at the most popular Russian IT blog geektimes.

Модемы AnyDATA | Отзывы покупателей

Now we insert the modem into the USB port of a router and we watch the events. For each device they are unique. From the first not always it turns out to make it in time, it is necessary to be trained. We swing the firmware checked by me au-300a is option of a firmware of Oleg.